Ernie-Hartman
- Total activity 128
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 73
Articles
Votes on activity by Ernie-Hartman Sort by votes-
Generic Radio Steering Wheel Control Connection and Setup
If you cannot find your radio brand in any of the steering wheel control module applications, please follow these steps. This process will apply to models like Boss, Pyle, Soundstream, Atoto, and m...
-
Adding Load Resistors to Chrysler / Dodge / Jeep / RAM Radios
If you are installing a line output converter into a 2014+ Chrysler / Dodge / Jeep / RAM vehicle, and are not getting any sound from the factory head unit or the factory amplifier, follow the attac...
-
The Difference Between Balanced and Unbalanced Signals
This topic comes up a lot due to the input switch that can be found on our SX2 and TI3 line of amplifiers. This article will cover the difference between balanced and unbalaced signals and how that...
-
Nav Output Wire Color Discrepancies on Radio PRO modules
If you come across navigation signal wires with colors that do not match the instructions, please reference the tech brief below for clarification.
-
Updating the Firmware on an AmpPro Module
If you need to update the firmware on your AmpPro module, watch the video below for the tutorial. This procedure is the same for all AmpPro modules.
-
RP4-CH11 Stops Functioning After Being Installed
It has come to our attention that after the RP4-CH11 has been installed for a few days or up to two weeks it may no longer power up when the vehicle is started. While we are thoroughly researching ...
-
RP4.2-BM21 Reverse Sensor Chimes Not Working
This update file fixes issues seen with reverse sensor chimes not working on the RP4.2-BM21. INSTALLATION INSTRUCTIONS If this is the first time using the RadioPRO PC Application, download the Rad...
-
RPK4-HD1101 Stuck in Steering Wheel Control Programming
If you install this kit and it stays forever stuck in the SWC programming during setup, you will need to loosen the screws on the back of the kit to relieve some pressure from the button membrane. ...
-
Legacy Phoenix Gold Amplifier Repairs
If you have an older, legacy Phoenix Gold amplifier, or even a newer model that is out of warranty, that you would like repaired, AAMP Global has a partner that can help you with this. Please click...
-
LOC PRO Wiring for Factory Amplified Systems
See attached document for wiring the LOC PRO into factory amplified systems.